Head Bolt vs. ARP Stud Analysis/Discussion

All about the double over head cam head that we all love!

Re: Head Bolt vs. ARP Stud Analysis/Discussion

Postby Fred » Mon Sep 28, 2015 8:54 pm

These photos show the heavy under cut on this stud. It's probably the part listed above that others have used. No thanks.

Image

Image
Fred
 
Posts: 190
Joined: Fri Nov 26, 2010 8:19 am

Re: Head Bolt vs. ARP Stud Analysis/Discussion

Postby Fred » Mon Nov 02, 2015 10:15 am

Fred
 
Posts: 190
Joined: Fri Nov 26, 2010 8:19 am

Re: Head Bolt vs. ARP Stud Analysis/Discussion

Postby Fred » Sat Nov 07, 2015 8:27 pm

Had a measure up the other night, I ordered a stack of 5 washers, however it'll take at least 6, probably 7, and in the case of a shaved head/block or thinner head gasket, possibly 8. I'm going to order 30 more, and if I don't end up using some, then that's OK. Aside from the sheer height of the spacer stack, it's looking like a winner. It's a shame they don't make a suitable stud off the shelf, but once dialed in, this solution should work very well indeed.
Fred
 
Posts: 190
Joined: Fri Nov 26, 2010 8:19 am

Re: Head Bolt vs. ARP Stud Analysis/Discussion

Postby Fred » Mon Aug 22, 2016 9:53 pm

Yesterday 31 more washers arrived! Now I just need to get it all cleaned up and test fit to see how many I really need in each stack.

And get a suitable gasket...
And mod the head for drainage...
And get the head skimmed to a fine finish...
Fred
 
Posts: 190
Joined: Fri Nov 26, 2010 8:19 am

Previous

Return to Top End

Who is online

Users browsing this forum: No registered users and 1 guest

cron